Home Products Loudspeaker System KW152

KW152
KW152 - Active Loudspeaker

Fitur

  • Woofer 15” ; woofer midrange 6.5” ; driver diafragma kompresi 1.75” .
  • Jangkauan 60° conical DMT.
  • Peak maksimum  SPL 133 dB.
  • Modul power Class D 1000-watt  (2 × 500 W kontinyu).
  • Onboard mixer  dengan dua konektor input combo XLR dan ¼” , serta input stereo RCA, (tiga sumber input audio); dua output kanal langsung dan sebuah single summed balanced output.
  • Extensive DSP dengan fitur DEEP™ dan Intrinsic Correction™ meningkatkan performa sistem.
  • DMT™ (Directivity Matched Transition) menjamin area jangkauan yang seragam diseluruh zona suara.
  • Kerangka dari kayu birch yang kuat dengan tekstur warna.
  • Empat posisi gain Mic/Line.
  • Kisi-kisi  baja 16 gauge tour-grade .
  • Pegangan ergonomis dan nyaman .
  • Soket pole standar 35 mm (non-tilt).
  • M10 rigging points for suspended installation.

Spesifikasi

Configuration 15" 2-way multipurpose
Transducers
Low-frequency
High-frequency

15" cone transducer

-

1.75" diaphragm compression driver
Frequency Response (-6 dB) 47 Hz to 18 kHz
Frequency Range (-10 dB) 44 Hz to 20 kHz
Nominal Coverage (-6 dB) 60° axisymmetric
Maximum SPL1 133 dB peak
Amplifiers
Power Output2 1000 W Class D (500 W LF + 500 W HF) continuous
2000 W peak
Input Impedance

Channel A XLR / ¼": 

Mic gain setting Balanced Unbalanced
0 dB 38 kΩ 19 kΩ
+ 12 dB 10 kΩ 5 kΩ
+ 24 dB 2.66 kΩ 1.33 kΩ
+ 36 dB 660Ω 330 Ω

Channel B XLR / ¼": 38 kΩ balanced / 19 kΩ unbalanced
Channel B RCA: 10 kΩ
Controls Power, Gain A, Gain B, Channel A Input Gain (0 dB / 12 dB / 24 dB / 36 dB), LF Mode (Ext Sub/Norm/DEEP™), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit)
Indicators Power, Signal A, Signal B, Standby, Limit, Mic (24 dB and 36 dB settings)
Connectors Balanced female XLR/¼" line/mic level input, Balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out , Balanced male XLR "mix" out, Stereo RCA line level input, Remote gain control, Locking IEC power connector
Cooling On demand, 50 mm variable speed fan
Amplifier Protection Thermal limiting, output overcurrent, overtemperature muting, GuardRail™
Transducer Protection Thermal limiting, excursion limiting
AC Power Input Universal power supply 100–240 VAC, 50 to 60 Hz
AC Power Consumption
(1/8 of full power)		 100 VAC, 2.3 A
120 VAC, 2.01 A
230 VAC, 1.13 A
Enclosure
Material 15 mm painted birch plywood
Finish Black textured paint
Grille Black powder coated 16 gauge steel
Dimensions (HWD) inches 32.1 x 17.5 x 15.2
Dimensions (HWD) mm 816 × 445 × 386
Weight (Net) 64 lb / 29 kg
Available Accessories KW152 cover, KW M10 kit

 

 

Related Product