AP-5122

Fitur

• DMT™ (Directivity Matched Transition) menjamin respon power yang koheren dan merata diseluruh area pendengaran.
• Kompresi diafragma 3” menghasilkan respon frekuensi tinggi yang powerful dan jernih. 
• Fitting M10 dan mount dengan sistem kuk menawarkan opsi penempatan amplifier yang fleksibel untuk berbagai kebutuhan pengaplikasian.
• Desain yang rapi dengan kisi-kisinya yang sederhana menjadikan amplifier ini mudah disesuaikan dengan berbagai tema dekorasi dan pengaturan tempat.
• Konektor NL4 Speakon dan terminal barrier strip yang tertutup.
• Bi-amp / passive switchable.
• Menggunakan konstruksi Baltic birch plywood 15 lapisan.
• Kisi-kisi 16-gauge yang dilapisi serbuk baja.
• Tersedia warna hitam (RAL 9011) dan putih (RAL 9010).
• Informasi lengkap mengenai EASE, CAD & BIM tersedia secara online.
• Dapat juga digunakan untuk surround sinema yang high-power.

 

Spesifikasi

AP- 5122
Frequency response (-10 dB)	48 Hz - 18 kHz
Rated noise power / voltage1	550 watts / 60 volts rms
Broadband sensitivity2	95 dB SPL
Coverage angle	90? conical DMT
Directivity factor (Q)	6.0
Directivity index (DI)	7.8
Recommended crossover	950 Hz, 48 dB/octave
Maximum SPL at 1 m (passive)	122 dB continuous3 128 dB peak4
Rated impedance	8Ω
HF transducer	76 mm (3-inch) voice coil, compression driver;  72 W / 24 V (2 hours)
LF transducer	305 mm (12-inch) driver with 102 mm (4-inch) voice coil;  550 W / 60 V (2 hours)
Optional accessories	AP-YM12 Yoke mount  M10 Kit-W
Enclosure details
Input connector	Covered barrier strip, NL4 connector
Enclosure material	15-ply Baltic birch plywood
Attachment points	Fifteen M10 threaded inserts
Color	Black (RAL 9011), White (RAL 9010)
Grille	16-gauge powder coated steel
Dimensions (H×W×D)	26 × 15 × 13
Dimensions (HWD) mm	660 x 381 x 330
Net weight	65 lb / 29.5 kg
1. 2 hour rating using IEC60268 noise based on minimum impedance. 2. Mid-band based on nominal impedance; 2.83 V at 1 m for 8Ω loudspeakers or 2 V at 1 m for 4Ω. 3. Calculated as the nominal sensitivity plus 10× the log of continuous rated power in volts squared divided by nominal impedance. 4. Calculated as the continuous calculated max output plus 6 dB.