AD-S8T

Fitur

• Woofer 8” yang tahan cuaca; 1.4” compression driver.
• Jangkauan 105° conical DMT.
• Saturasi rendah 60 watt dan trafo 70/100V low-loss dengan bypass 8Ω.
• Peak maksimum SPL 119 dB (8Ω bypass).
• DMT™ (Directivity Matched Transition) menjamin respon frekuensi yang seragam dan merata ke semua area jangkauan. 
• Sistem X-Mount™ memudahkan pemasangan loudspeaker di sudut manapun dengan kokoh dan tidak akan bergeser.
• Adanya opsi mount berbentuk kuk dan M10 Kit-C membuat isntalasi loudspeaker lebih fleksibel.
• Kumpulan penyaring suara yang canggih dari fitur QSC Intrinsic Correction™, apabila menggunakan prosesor Q-SYS atau platform amplifier CXD.
• Menggunakan kerangka ABS yang ringan memberikan daya tahan lebih lama dan tampilannya tetap terjaga.
• Tutup panel input tersegel dan kisi-kisi yang dilapisi serbuk alumunium memberikan ketahanan terhadap cuaca..
• Fitur IEC60529 IP-54 yang resisten terhadap debu dan percikan air.
• Tersedia dalam warna hitam (RAL 9011) dan putih (RAL 9010).
• Informasi lengkap tentang EASE, CF2, CAD, dan BIM tersedia online.

Spesifikasi

AD-S8T
Effective frequency range	55 Hz - 20 kHz
Rated noise power / voltage	200 watts / 40 volts (rms)
Broadband sensitivity	90 dB SPL
Coverage angle (-6 dB)	105° conical DMT
Directivity factor (Q)	7
Directivity Index	9 dB
Maximum continuous SPL	113 dB
Maximum peak SPL	119 dB
Rated impedance	8 ohms
Recommended amplifier power (loudspeaker "program" power)	400 watts
Transformer taps	70 V: 60, 30, 15, 7.5 W and 8Ω bypass 100V: 60, 30, 15 W and 8Ω bypass
HF transducer	1” exit / 1.4” voice coil compression driver
LF transducer	8” weather resistant paper cone woofer 2” / 51 mm voice coil
Input connector type	Euroblock connector with parallel output terminals
Enclosure material	Painted ABS polymer
Grille material	Powder coated aluminum
X-Mount material	Powder coated aluminum
Enclosure Details
Ingress protection	IP-54
Operating environment	Designed for indoor and outdoor use
Testing	The AD Series loudspeakers qualified for outdoor use using the following tests: Salt fog: MIL-STD-810G Method 509.5 for 100 hrs. Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days High and low temperature: tested to QSC internal standards between -20° and 50° C
Net weight	24.1 lb / 11 kg
Product dimensions  (HWD) inches	17.3 × 10 × 9.9
Product dimensions  (HWD) mm	440 × 254 × 251
Shipping weight	32.1 lb / 14.5 kg
Shipping dimensions  (HWD) inches	24.3 × 13.8 × 13.8
Shipping dimensions  (HWD) mm	729 × 351 × 351
Included accessories	X-Mount mounting system, Euroblock connector, input panel cover
Optional accessories	YMS8T yoke mount, M10 Kit-C
1. Free-field, -10 dB from on-axis sensitivity 2. IEC60268-1 noise signal for 2 hours 3. On-Axis, free-field sensitivity, 2.83V, 1 m 4. Calculated from rated noise voltage and sensitivity