Home Products Loudspeakers AD-S32T

AD-S32T
AD-S32T

Features

  • 3-inch polypropylene cone woofer
  • 0.75-inch titanium dome tweeter
  • 30 Watts continuous power handling, 120 watts peak
  • 70/100 volt multitap transformer with 8 ohm bypass
  • Includes ball mount assembly and yoke mount
  • Available in black or white
SPECIFICATIONS
 
Configuration Compact two way, ported enclosure
Transducers  
Low-frequency 3-inch (7.6 cm) weather resistant, polypropylene cone woofer
High-frequency 0.75-inch titanium dome tweeter
Frequency Range 1  
Frequency Response (-6 dB) 73 Hz to 20 kHz
Useable Frequency Range (-10 dB) 65 Hz to 20 kHz
Maximum Output 2  
Calculated Peak Output 105 dB SPL
Calculated Continuous Output 99 dB SPL
Nominal Impedance 8 ohms switchable
Power Rating  
Continuous power handling3 30 W (100 hours IEC)
Recommended max amp power 60 W (loudspeaker "program" power)
Sensitivity 85 dB, 2.83 V, 1 m, free space (4 pi)
Nominal Coverage 100° × 100°
TRANSFORMERS
Type Custom low-distortion laminated core, wide-bandwidth design
Taps 70 V: 30, 15, 7.5, 3.8 W / 8Ω bypass>
100 V: 30, 15, 7.5 W / 8Ω bypass
Environmental Exceeds Mil Spec 810 for humidity, salt spray and dust; IEC 60529 IP-X3 splash rating
Agency Rating Transformer—listed UL1876
ENCLOSURE
Material Injection molded, weather resistant high impact polystyrene
Finish White or black (paintable)
Grille Heavy duty powder coated aluminum
Connectors Screw terminals
Mounting hardware Ball mount assembly; yoke mount bracket included
Product Dimensions 7.9-inch x 4.8-inch x 5.5-inch
H x W x D 202 mm x 123 mm x 140 mm
Weight 4 lb (1.8 kg) net
10 lb (4.5 kg) shipping (pair)

1All frequency ranges specified refer to measured free field response.
2Calculated SPL at 1 m, (free space, 4 pi), speaker operating at rated continuous power with pink noise within specified frequency range
3Maximum input power tested in accordance with IEC 268-5 recommendations, 50 Hz–20 kHz band limiting, 6 dB signal crest factor.

Specifications are subject to change without notice. 

Related Product