Home Products Loudspeakers AcousticDesign Series AD-S12

AD-S12
AD-S12

Fitur

  • Woofer 12” yang tahan cuaca; 1.4” compression driver.
  • Jangkauan 75° conical DMT.
  • Peak maksimum SPL 126 dB.
  • DMT™ (Directivity Matched Transition) menjamin respon frekuensi yang seragam dan merata ke semua area jangkauan. 
  • Sistem X-Mount™ memudahkan pemasangan loudspeaker di sudut manapun dengan kokoh dan tidak akan bergeser.
  • Adanya opsi mount berbentuk kuk dan M10 Kit-C membuat isntalasi loudspeaker lebih fleksibel.
  • Kumpulan penyaring suara yang canggih dari fitur QSC Intrinsic Correction™, apabila menggunakan prosesor Q-SYS atau platform amplifier CXD.
  • Menggunakan kerangka ABS yang ringan memberikan daya tahan lebih lama dan tampilannya tetap terjaga.
  • Tutup panel input tersegel dan kisi-kisi yang dilapisi serbuk alumunium memberikan ketahanan terhadap cuaca..
  • Fitur IEC60529 IP-54 yang resisten terhadap debu dan percikan air.
  • Tersedia dalam warna hitam (RAL 9011) dan putih (RAL 9010).
  • Informasi lengkap tentang EASE, CF2, CAD, dan BIM tersedia online.

Spesifikasi

 
Effective frequency range 52 Hz - 20 kHz
Rated noise power / voltage 300 watts / 50 volts (rms)
Broadband sensitivity 95 dB SPL
Coverage angle (-6 dB) 75° conical DMT
Directivity factor (Q) 12
Directivity Index 11 dB
Maximum continuous SPL 120 dB
Maximum peak SPL 126 dB
Rated impedance 8 ohms
Recommended amplifier power
(loudspeaker "program" power)		 600 watts
Transformer taps

n/a
HF transducer 1” exit / 1.4” voice coil compression driver
LF transducer

12” weather resistant paper cone woofer, 3” / 76 mm voice coil
Input connector type Euroblock connector with parallel output terminals
Enclosure material Painted ABS polymer
Grille material Powder coated aluminum
X-Mount material Powder coated aluminum
Enclosure Details
Ingress protection IP-54
Operating environment Designed for indoor and outdoor use
Testing

The AD Series loudspeakers qualified for outdoor use using the following tests:

Salt fog: MIL-STD-810G Method 509.5 for 100 hrs.
Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days
High and low temperature: tested to QSC internal standards between -20° and 50° C
Net weight 23.4 x 13.9 x 12.7
Product dimensions 
(HWD) inches		 594 x 354 x 323
Product dimensions 
(HWD) mm		 35.2 lb / 16 kg
Shipping weight 46.3 lb / 21 kg
Shipping dimensions 
(HWD) inches		 34.5” x 17.9” x 17.2” (765 x 455 x 437 mm)
Shipping dimensions 
(HWD) mm		 729 × 351 × 351 
Included accessories X-Mount mounting system, Euroblock connector,
input panel cover
Optional accessories YMS8T yoke mount, M10 Kit-C
1. Free-field, -10 dB from on-axis sensitivity
2. IEC60268-1 noise signal for 2 hours
3. On-Axis, free-field sensitivity, 2.83V, 1 m
4. Calculated from rated noise voltage and sensitivity

 

Related Product