AD-S10T

Features

• Woofer 10” yang tahan cuaca; 1.4” compression driver.
• Jangkauan 90° conical DMT.
• Saturasi rendah 100 watt dan trafo 70/100V  low-loss dengan bypass 8Ω.
• Peak maksimum SPL 122 dB (8 ohm bypass).
• DMT™ (Directivity Matched Transition) menjamin respon frekuensi yang seragam dan merata ke semua area jangkauan. 
• Sistem X-Mount™ memudahkan pemasangan loudspeaker di sudut manapun dengan kokoh dan tidak akan bergeser.
• Adanya opsi mount berbentuk kuk dan M10 Kit-C membuat isntalasi loudspeaker lebih fleksibel.
• Kumpulan penyaring suara yang canggih dari fitur QSC Intrinsic Correction™, apabila menggunakan prosesor Q-SYS atau platform amplifier CXD.
• Menggunakan kerangka ABS yang ringan memberikan daya tahan lebih lama dan tampilannya tetap terjaga.
• Tutup panel input tersegel dan kisi-kisi yang dilapisi serbuk alumunium memberikan ketahanan terhadap cuaca..
• Fitur IEC60529 IP-54 yang resisten terhadap debu dan percikan air.
• Tersedia dalam warna hitam (RAL 9011) dan putih (RAL 9010).
• Informasi lengkap tentang EASE, CF2, CAD, dan BIM tersedia online.

Spesifikasi

AD-S10T
Effective frequency range	50 Hz - 19 kHz
Rated noise power / voltage	250 watts / 45 volts (rms)
Broadband sensitivity	92 dB SPL
Coverage angle (-6 dB)	90° conical DMT
Directivity factor (Q)	10
Directivity Index	10 dB
Maximum continuous SPL	116 dB
Maximum peak SPL	122 dB
Rated impedance	8 ohms
Recommended amplifier power (loudspeaker "program" power)	500 watts
Transformer taps	70 V: 100, 50, 25, 12.5 W and 8Ω bypass 100V: 100, 50, 25 W and 8Ω bypass
HF transducer	1” exit / 1.4” voice coil compression driver
LF transducer	10” weather resistant paper cone woofer 2.5” / 64 mm voice coil
Input connector type	Euroblock connector with parallel output terminals
Enclosure material	Painted ABS polymer
Grille material	Powder coated aluminum
X-Mount material	Powder coated aluminum
Enclosure Details
Ingress protection	IP-54
Operating environment	Designed for indoor and outdoor use
Testing	The AD Series loudspeakers qualified for outdoor use using the following tests: Salt fog: MIL-STD-810G Method 509.5 for 100 hrs. Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days High and low temperature: tested to QSC internal standards between -20° and 50° C
Net weight	31 lb / 15 kg
Product dimensions  (HWD) inches	20.3 × 12.5 × 11.7
Product dimensions  (HWD) mm	516 × 318 × 298
Shipping weight	40.6 lb / 18.45 kg
Shipping dimensions  (HWD) inches	31.7 × 16.1 × 16.1
Shipping dimensions  (HWD) mm	805 × 409 × 409
Included accessories	X-Mount mounting system, Euroblock connector, input panel cover
Optional accessories	YMS8T yoke mount, M10 Kit-C
1. Free-field, -10 dB from on-axis sensitivity 2. IEC60268-1 noise signal for 2 hours 3. On-Axis, free-field sensitivity, 2.83V, 1 m 4. Calculated from rated noise voltage and sensitivity