Home Products Loudspeakers AC-C4T

AC-C4T
AC-C4T

Features

  • High quality 4.5-inch full-range transducer provides exceptional clarity through the critical voice range.
  • Ported baffle for increased low frequency extension down to 70 Hz.
  • Low-saturation 70V/100V transformers with 8-ohm bypass.
  • 4-pole Euroblock connector for easy system wiring.
  • Intrinsic Correction™ voicings available via Q-SYS Platform.
  • White (RAL 9010).
  • Complete EASE, CAD, and BIM information available online

Ideal for: foreground audio, POTS, airports, public address
HF roll-off above 8kHz = ideal for voice (far-end, paging, etc)
Larger cone / magnet (Bl) = higher sensitivity (89 dB)
Narrower coverage (140°) = ideal for higher ceilings (<15ft)

Specification

Specifications AC-C4T
Effective frequency range 70 Hz to 16 kHz
Rated noise power / voltage 16 watts / 11.3 volts (rms)
Broad-band sensitivity 89 dB SPL
Coverage angle (-6 dB) 140° (500 Hz to 5 kHz)
Maximum continuous SPL 101 dB
Maximum peak SPL 107 dB
Rated impedance 8 ohms
Transformer taps:
70 V 16, 8, 4, 2, 1 watts and 8-ohm bypass
100V 16, 8, 4, 2, watts and 8-ohm bypass
Transducer 4" Polypropylene cone with butyl rubber surround
Input connector type  Euroblock connector with parallel output terminals 
Baffle material Painted ABS polymer 
Grille material Powder coated steel 
Back can material Galvanized steel
Testing Listed UL1480, UL2043 safe for use in air handling space
Net weight 4.9 lb / 2.22 kg 
Product dimensions 8.4" × 7.9” (214 × 201 mm) 
Cut-out Dimensions 7.31" (185.67mm) 
Ceiling Capture Thickness 0.25" to 1.5" (6.35 to 38.1mm) 
Shipping weight 15.1 lb / 6.86 kg 
Shipping dimensions 10.75" × 24" × 10.5" (273.1 × 609.6 × 266.7 mm) 
Included accessories     Rails and C-ring for ceiling tile installation 

All specifications are subject to change without notice.

 

Related Product